Expert Answers about Hitch Fabrication Parts
- Is There a Front Mount Trailer Hitch Receiver For a 1997 Toyota 4Runner SR5 4X$?
- To install a front trailer hitch receiver on your 1997 Toyota 4-Runner you are going to have to have one fabricated using a part like our Weld On Receiver # E17. You will want to visit a local fabrication shop near you to discuss over your options.
view full answer... - Solution for Trailer Hitch Receiver on 2012 Porsche Panamera
- It looks like there was a Stealth Hitch for the 2012 Panamera which was the SHR35005. It has been discontinued and is nowhere to be found. I cannot recommend adapting the Stealth Hitch to your 2012 model either since it is only designed to fit the 2017-2021 models. Your best bet is to have a hitch custom fabricated for your vehicle. You can take the Curt Weld-On 2" Receiver for Custom Fabricated Hitches # E17 to a fabricator and have them fashion a hitch that can be used to carry your bike rack.
view full answer... - Availability of Replacement Fabric for 19' Solera XL Awning
- Lippert only offers the fabric with the roller for the Solera XL Awning. There is no option to replace just the fabric. The correct part for your 19' awning is the Replacement Roller and Fabric Kit for 19' Solera XL Power RV Awnings - Black Fade # LCV000334966. It is also available with white fade # LCV000335007 and burgundy # LC26MQ.
view full answer... - Trailer Hitch Receiver for a 2002 Dodge Ram 1500 Short Bed with a Roll Pan Bumper
- Hey Robert, thanks for reaching out!
For your application you need to use the Curt Weld-On 2" Receiver # E17 and have a fabrication shop help you install it on your 2002 Dodge Ram 1500. Unfortunately there aren't any custom style hitches for your truck so this fabrication receiver is what you'll need.
view full answer... - Solution for Hitch With 2 Inch Receiver on 2019 Toyota Camry LE
- I do have a solution, but the only custom fit hitches made for your 2019 Toyota Camry are Class I with a 1-1/4" receiver like the # C11576. This is fairly common for a car that isn't designed for towing. If you want to continue to use your bike rack that fits a 2" receiver the only option would be to have a hitch fabricated. You can take the # E17 to your local fabricator and have them fashion a hitch that will fit your Camry for your bike rack.
view full answer... - Is There a Trailer Hitch Receiver For a 2016 Fiat 500X Trekking Edition?
- I currently do not see that any manufactures a trailer hitch receiver for your 2016 Fiat 500X Trekking edition. We do have the Weld-On Receiver # E17 that you can take to a local fabrication shop to see about a custom fabricated receiver.
The 4-Way Harness # C59236 will allow you to splice into your factory wiring. This 4-way is the common connector on most small trailer and will also allow for Auxiliary Lights # C53201 should you have a hitch mounted accessory like a bike rack which...
view full answer... - Replacement 16 foot Awning Fabric for Jayco Jay Flight 264BHW
- Hey Nancy, we have several replacement awning fabric kits for 16 foot awnings like what you have for example the part # LCV000334400 which is solid black or the part # LCV000334394 which is a black fade. To see them all check out the link attached on this page. All of the options there will fit in place of what you have since they are universal fit.
view full answer... - Gooseneck Hitch Solution for 2023 Ford F-450 Cab and Chassis
- Hey John, the only option for a gooseneck hitch on a cab and chassis would be custom fabrication. The B&W Turnoverball Underbed Gooseneck Trailer Hitch part # BWGNRK1500 is designed for this type of application so that's what I recommend but you will need to find a welder local to you who can come up with brackets. We do not have any fender solutions.
view full answer... - Bumper and Pintle Hitch Connection For a 2003 Chevrolet 6500 Series Chassis
- Currently we do not have a custom fit setup for your 2023 Chevrolet 6500 but you may be able to create a custom setup. You can use the Fabrication Kit # 3371809042 along with the ICC Bumper # 3371809025 to create your own plate. The fabrication kit includes a 5/8" thick mounting plate which is 34-1/2" wide by 15-1/2" tall.
Then you will need to drill a hole in the mounting plate for a spring type Pintle Hook # 337BP100A. Otherwise we have a standard bolt on Pintle # 33710040
view full answer... - Replacement Awning Fabric For a 15' Awning On a 2006 Keystone Outback 26RKS
- The Replacement 14'1" Fabric for 15' RV Awning # LCV000334387 is compatible with Solera, Dometic A&E, or Carefree RV awnings which have an 8' projection. The only way I can say for sure it will work is to know exactly what awning you have and the only way is for you to find the manufacturer tag on the tube underneath the fabric. I have no way to see what was installed on your 2006 Keystone Outback 26RKS or to know if it was changed at some point in the last 19 years.
view full answer... - Solution for Trailer Hitch on 1964 MGB
- Nobody makes a hitch for a 1964 MGB. What you can do is take the # E17 to a fabricator. They will be able to fashion a custom hitch for your vehicle.
view full answer... - Is There a Class III Trailer Hitch Receiver For a 1983 Jeep Cherokee?
- It appears you are going to have a custom hitch fabricated for your 1983 Jeep Cherokee using a Weld-On Receiver # E17. I recommend visiting a custom fabrication shop near you to discuss what the best option may be and to inspect your chassis to ensure there is no severe corrosion which may need to be addressed.
The Curt Powered Tail Light Converter # C59236 is a universal 4-way wiring harness which will draw power from your vehicle battery to reduce strain on your factory harness. If...
view full answer... - Solution for Adjustable Pintle Hook With 15" Rise
- A 15" rise is not something that is typically seen on a standard ball mount or pintle hitch for a 2" receiver. The closest thing we have is the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers # 325-GH-525. This includes their pintle lock which allows it to work as a pintle hitch. However, it only has a maximum rise of 10". There is a 15" version which is the # 325-GH-327 but it can only be used in the drop position due to the leverage that would be applied in the rise position for something...
view full answer... - Is There a Trailer Hitch Receiver Which Fits a 2012 BMW 523i Wagon?
- Since the Curt # C11381 and every other receiver I can find will only fit the sedan versions you are going to have to have a custom receiver fabricated for your 2012 BMW 523i F11 wagon. The Curt Weld-On 2" Receiver # E17 is a great starting point as it provides a large mounting surface in which to weld on cross tubes which can then attach to the chassis.
I recommend installing the 4-Way # C59236 when you have the receiver fabricated. This is the most common connector for small trailers...
view full answer... - Solution for Trailer Hitch on 1992 Nissan Homy
- None of your typical hitch manufacturers make a hitch for the 1992 Nissan Homy. The best option is to take the # E17 to a local fabricator and have them fashion a custom hitch for your vehicle.
view full answer... - Replacement Extang Trifecta Tarp for 2015 Ram 1500 6-1/2 ft Bed
- Hey Michael, yes the Extang replacement tarp part # EX92430-20 is the correct replacement fabric tarp for the Extang Trifecta that fits your 2015 Ram 5100 6-1/2 foot bed.
view full answer... - Availability of Trailer Hitch for 1992 Eurovan
- The Curt # 13217 you looked at only fits the 1993-2003 models of the Eurovan. It looks like the 1992 model was only available in Europe so there are likely some differences that don't allow the hitch to fit. The only option would be to take the # E17 to a fabricator and have them fashion a custom fit hitch for your 92 Eurovan.
view full answer... - Is The Fabric In The Camco Olympian Wave 3 Catalytic Safety Heater Replaceable?
- Hello Randi. What you are seeing behind the metal grid on your Camco Olympian Wave 3 Catalytic Safety Heater # CAM57331 is actually the catalytic fabric which is part of the heating system as you can see in the picture below. These unfortunately are not replaceable so if something is wrong with yours it will likely mean getting a whole new heater.
view full answer... - Does Solera Awning Light Strip Kit Need to be Sealed When Trimmed
- Hey Jean-Marc, so the part # LC423331 was designed to be trimmed and has edges that were designed to be trimmed at so you don't have to reseal anything.
Yes the LED Light Kit w/ Switch for Solera RV Awnings with Prepflex Fabric # LC674283 does come with it's own track but it was designed to install into the fabric slot of a Solera awning roller so it's not a universal application.
view full answer... - Trailer Hitch Receiver For a 2024 Nissan Sentra
- At this time I do not see that anyone makes a custom fit receiver for your 2024 Nissan Sentra. You would have to have a custom receiver fabricated at a local shop using something like the Weld-On Receiver # E17.
We do have a 4-Way Harness # 118582 available should you need that component as well.
view full answer...
Go To Results